Tactical Gear Sewing

I’m providing a link to a nice article about the invention of the modern day sewing machine. Elias Howe and Walter Hunt were two men who poured their heart and soul into the invention, only to have Singer come along and make most of the money. I have an antique Howe machine in my office that actually still works.

http://www.fayettedailynews.com/article.php?id_news=5674

Ok, i’m going crazy reviewing copy on our website. Is it duffle bag or duffel bag? Apparently, spell check takes either. But shouldn’t there be only one that is correct?

From dictionary.com…

duf·fel   /ˈdʌfəl/ Show Spelled[duhf-uhl]
–noun
1.a camper’s clothing and equipment.
2.a coarse woolen cloth having a thick nap, used for coats, blankets, etc.
3.duffel bag.

Also, duffle.

Origin:
1640–50; after Duffel, a town near Antwerp

Well..that doesn’t help. I guess I’ll get over it. At least I learned it came from Belgium.

In the custom sewn business, it would be great if there was a standard checklist for every finished product. However, each product is different will have its own specific criteria.

Without giving away all of our secrets, here is a standard list of things we check to ensure a quality product.

Fit: Does the item the bag/pouch is designed to hold fit properly inside

Placement of Parts (web, veclro, snaps, etc): At mark or within tolerance allowed

Seam Allowances:  typically 3/16” on all products; seams are to be within +/- 1/16”.

Cuts - cuts in material flaws, crooked cuts, ragged cuts

Snaps/Rivets – set in wrong position, missed hole, machine not set correctly

Closing Stitches: in the same line as the binding stitches on the front and back of the product.

Bartacks: check location; placement is critical, can cause some items to be too small

Tension and Thread Clipping:  Stitches should be tight and the tension should be set so you cannot see the loop of the top and bottom threads. Threads clipped to within tolerance.

Stitch Length - typically 7-11 stitches/inch

Binding – not applied correctly, loose, smashed, uneven, not caught on both sides, overlapped binding not covered.

Programmable stitching – out of bobbin thread, missing bartack, tacked in wrong position, located part in wrong position, tack chewed up binding.

Remember, it’s always best to have a second sets of eyes inspect.

It won’t make headlines, but the landscape for defense suppliers just changed. DoD acquisitions generally fall under the Berry Amendment or Buy American Act. These guidelines require 100% of raw components and manufacturing labor to be derived in the U.S. However, the rules are different now. A recent determination made by the Administrator for Federal Procurement Policy ruled that the Buy American Act “component test” is inapplicable to acquisitions of commercially available off-the-shelf items (COTS).

What does this mean???

The raw materials that go into certain finished products don’t have to be Made in the USA. This is a huge shift in policy. I’m sure a lot of analysis went into this. It’s a very fine balancing act supporting the current needs of our country while still adhering to the principle of self-defense. The reality today (which I am very well aware of) is that it is very difficult to make a 100% Made in USA product. There is simply not a strong enough textile base in this country anymore. Across the entire spectrum of textile components (fabric, velcro, fasteners, molded plastics, thread, etc), there is only a tiny fraction of suppliers there once was. My frustration grows day by day as more businesses exit textiles and smart people leave the industry for good.  

The Dept of Defense is certainly recognizing this and clearly is frustrated by how difficult it is to buy items that otherwise are common in the marketplace. In these times of global threats, our military can’t go without the supplies they need. And they need them fast too.

Back to my world…When I am presented with an opportunity to make an item, often the biggest challenge is not making the item (we can sew as well or better than anywhere on this globe), but sourcing the components. Leave the price differences aside. The bigger effect of  a ravaged textile base is fewer choices, higher minimums, and longer lead times. You can’t find what you need or get it when your customer has to have it. This doesn’t work well for government entities that like to take a long time to make decisions.  When the decisions are finally made, they need it yesterday. No one will solve the bureaucracy issue. Instead, more frequently than not,  I get to explain the bad news and look like the bad guy.  

It’s important to remember that the ruling applies to off-the-shelf items only, not the significant amount of items that are made custom for our U.S. military. So we’re only talking about a smaller segment of the DoD budget. Selfishly and from a short-term perspective, this creates more opportunities as a finished product manufacturer. However, long term it’s going to make things even more difficult for our  manufacturing supply base, and for me, making the custom items. That’s not good news for our country.  

Obviously, there’s not a perfect decision. Soldiers can’t go without.  While long term, we need to ensure we have the manufacturing base to defend ourselves against the growing threats of this world.

I’d love to hear what you think.

Here’s a short list to consider if you’re having issues with stitches skipping.

Wrong thread for the application.
Quality defects in the thread.
Improper needle / thread size relationship.
Worn or defective thread guides or eyelets.
Improper threading.
Excessive machine thread tension.
Defective needle or improper positioning of the needle.
Needle heat.
Worn or defective machine parts (burrs or sharp surfaces on thread handling or stitch forming devices).
Machines out of adjustment.
Improper feeding.
Improper operator handling.

I promised that I would include in this blog articles or educational pieces that I feel would help a lot of people regardless of your industry. Just read this in Inc. magazine and believe this is recommended reading for any entreprenuer.

http://www.inc.com/magazine/20090901/john-kotters-urgent-message-for-entrepreneurs.html

Enjoy

I’ve often pondered and more often asked by prospects and customers why we choose Chicago for our sewing facility. Well, the simple reason would be that the company founders chose it, all the way back in 1921. But many things have changed since then, and it’s worth discussing why it still makes sense today.

Co-location with your customers is ideal for almost any business. But for us, we have a widely-dispersed national customer base. In fact, many of them are on the coasts: California, Florida, Virginia, Washington, the list goes on…Meanwhile, we’re sitting right smack in the middle. As it turns out, the numbers of customers on the east and west coasts have remained relatively balanced. If we were to shift to one coast, we would be at a significant coast disadvantage trying to serve the other. So we’re making a cognizant compromise to appeal to both. Consequently, we try to make up for any difference by running a tight ship. Fixed costs are maintained low so we can ride the ebbs and flows of a made-to-order business.

But in reality, why would a California customer chose us over someone in their backyard? Well, several do and here’s why. Just like our founders played a big role in our location, the birth and formation of the US textile industry on the East Coast has a lot to do with it.

The portfolio of raw goods that we work with are not freight-friendly (unless you’re the freight company, I guess). It’s expensive to ship heavy, oversize rolls of nylon, canvas, webbing, and foam. Assuming a Berry compliant product, chances are a West Coast cut and sew shop is ordering their materials from a mill in North Carolina, New Jersey, Rhode Island, Georgia, etc. That’s a long way to ship bulky goods. Being here in Chicago, it’is a much shorter trip. We take those bulky goods, convert them into compactible soft goods and ship them the rest of the way in their new form. Essentially, it helps level the playing field with our West Coast competitors. At the same time, you can see it puts a West coast competitor at a significant disadvantage if the ship-to address for the finished goods are back East

Having said all of that, we’re not in a commodity business. By definition, a sewn product is a hand made product. The level of craftsmanship displayed in the sewing plays the biggest part. And that’s clearly an advantage of being in business for over 80 years. Yet, I’m always asked price first. That’s a discussion for another post sometime. Have a great day!

This is a quote from a speech given by Theodore Roosevelt in Paris in April of 1910:

The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat.

Contract manufacturing is a tricky business sometimes. I’m given the specs of the product/invention/item, and we go to work to make it. I can make a lot of things for a lot of different industries. But we’re not  product application experts. I can’t replicate the environment where your product is used and don’t conduct market research before it leaves the door.

So I always have a conversation with my customer before they place an order that goes something like, “Remember, you’re not a distributor, and I’m not a product manufacturer”. Meaning…I don’t make products, I provide a service.  I can make a product exactly the way it is spec’d, but that doesn’t mean it’s going to work/fit your application. Never take receipt of your order and ship it out without checking it first. Maybe the specs you supplied were wrong? Maybe there are small tolerances in some of the dimenions. Maybe there were slight differences in the raw materials that were not perceptible to the sewer.

Sewing is not and will never be a science of perfection, but always an art. Ever look at a roll of fabric, you’ll certainly find imperfections. Order a roll of 1″ web strap sometime and grab a ruler. From end end to end, you’ll likely find width measurements anywhere between 7/8″ to 1-1/8″. It’s not perfect and issues can and do arise in a world where you rely on visual inspection. It’s the nature of human error. 2% rejection rate is not uncommon in the textile world. We’re proud of our craftsmanship, but my customers always know to check and test their product before it is sold. My production staff  completes in the neighborhood of 75-100 custom jobs every month. We’ll never be the experts. Our knowledge is wide, but not deep.

The federal Hubzone program was established for federal contractors located in econmically challenged areas. It is well intentioned. However, for many years, the system has been abused. The SBA simply did not have a process in place to audit whether or not the firms who applied for certification actually operated at the addresses they claimed to. Fortunately, someone must have taken notice at the General Accounting office (GAO). This past March, the GAO published a report exhibiting several cases of fraud and providing a handful of excellent recommendations. For those of us who follow the rules in federal contracting, this is a big breath of fresh air.

First, they are going to implement a series of spot checks. In fact, I personally received an unannounced visit from a rep in the local Chicago SBA office last month.

But there’s another important recommendation that also caught my attention. They are suggesting that the SBA audit awards to Hubzone firms to ensure that 50% of the personnel cost expended on contracts come from that company’s own payroll. This hopefully will eliminate any occurrrence of a company receiving a Hubzone set-aside award only to outsource the entire thing to another company. Unfortunately, this is a common occurrence as well.

For too long, the government procurement offices have had a policy of just collecting notarized statements with flase claims of compliance. This is a great step forward towards achieving what the original implementers hoped for. I got my fingers crossed that system integrity and transperency is back in place.